10I-10IS-10IX

Sản phẩm chính hãng được phân phối độc quyền tại Việt Nam. Được bảo hành chính hãng trên toàn cầu. Quý Khách vui lòng liên hệ với chúng tôi để được tư vấn và hỗ trợ với các chương trình khuyến mại hấp dẫn.

PENTAX MIỀN TRUNG - 540 Trần Cao Vân - Đà Nẵng.

LIÊN HỆ TƯ VẤN 0903 985 790

Mô tả

HƯỚNG DẪN SỬ DỤNG

Line of electric motors from 10” asynchronous, rewindable built in the following execution: – 10I motor sleeve made by AISI 304 and with upper/lower support made by cast iron; – 10IS motor sleeve and upper/lower support made by AISI 304; – 10IX motor sleeve and upper/lower support made by AISI 316. Motor is filled with a water and glycol mixture (freezing point -15°C) guarantees cooling and lubrication of the thrust unit (Kingsbury type self-centering onoscillating pads and graphite spacer ring) and of the bushings; pressure compensation occurs through a rubber membrane located on the lower side and a compensation valve in the upper part, possibility to install the PT100 sensor even subsequently.

Upper / bottom support	cast iron (10I); AISI 304 (10IS); AISI 316 (10IX)
External jacket	AISI 304 / AISI 316
Mechanical seal	ceramic-graphite; SiC optional
Ball bearings	radial and axial, water lubricated
Number of startups/hr	max 5
Asynchronous 2 poles rewindable in oil bath	3~ 3x400V ± 10% – 50 Hz, 3~ 3×400/690V ± 10% – 50 Hz
Cooling Flow	min 1 m/s
Insulation class	B
Insulation	Double Insulation (I); PE2 + PA (PPA); VPE (VP)
Protection degree	IP6

10I-10IS-10IX 50HZ

MODEL 3~	HP	KW
10I 125	125	92
10I 150	150	110
10I 180	180	132
10I 200	200	147
10I 250	250	185
10I 125 I	125	92
10I 150 I	150	110
10I 180 I	180	132
10I 200 I	200	147
10I 250 I	250	185
10I 125 PPA	125	92
10I 150 PPA	150	110
10I 180 PPA	180	132
10I 200 PPA	200	147
10I 250 PPA	250	185
10I 125 VP	125	92
10I 150 VP	150	110
10I 180 VP	180	132
10I 200 VP	200	147
10I 250 VP	250	185